SOME CONCEPTS OF FAIL-SAFETY AND CYBER PROTECTION OF CONTROL SYSTEMS
https://doi.org/10.21683/1729-2646-2014-0-2-88-100
Abstract
The paper provides some definition of a hazardous failure and fail-safety, discusses relations and principal differences between functional reliability and functional safety, and analyzes alternatives for ensuring failsafety of control systems.
The paper considers major threats to cyber protection, ways of implementing cyber attacks, offers a concept of ensuring a guaranteed cyber protection level of control systems.
About the Authors
V. A. Gapanovich
JSC RZD
Russian Federation
Russian Federation
PhD Engineering, Chief Engineer, Senior Vice President
E. N. Rozenberg
JSC NIIAS
Russian Federation
Doctor of Technical Science, professor, First Deputy Director
Russian Federation
Doctor of Technical Science, professor, First Deputy Director
I. B. Shubinsky
Closed Company IB Trans
Russian Federation
Professor, Doctor of Technical Sciences, Director
Russian Federation
Professor, Doctor of Technical Sciences, Director
References
1. ISO 9126 GOST R ISO/IEC 9126-93 Information technology. Software product evaluation. Quality characteristics and guidelines for their use, 28.12.93
2. GOST R/IEC 61508. Functional safety of electrical, electronic, programmable electronic safetyrelated systems, 2010.
3. Shubinsky I., Schäbe H. On the definition of functional reliability. Dependability, 2012. – №4, pp. 74-84.
4. Tallinn Manual on the International Law Applicable to Cyber Warfare, 2013.
5. Rozenberg E.N., Shubinskiy I.B. Functional Safety of RailwayAutomation Systems: Methods and Models. Moscow: VNIIAS MPS UIC, 2005.- 155 p.
Review
For citations:
Gapanovich V.A., Rozenberg E.N., Shubinsky I.B. SOME CONCEPTS OF FAIL-SAFETY AND CYBER PROTECTION OF CONTROL SYSTEMS. Dependability. 2014;(2):88-100. https://doi.org/10.21683/1729-2646-2014-0-2-88-100
Views:
725
ISSN 1729-2646 (Print)
ISSN 2500-3909 (Online)
ISSN 2500-3909 (Online)
Email this article 